Want a Flipper Zero without paying inflated prices? Now's your chance

April 19, 2023

`Want a Flipper Zero without paying inflated prices? Now's your chance`

Tech

Why you can trust ZDNET : ZDNET independently tests and researches products to bring you our best recommendations and advice. When you buy through our links, we may earn a commission. Our process

‘ZDNET Recommends’: What exactly does it mean?

ZDNET’s recommendations are based on many hours of testing, research, and comparison shopping. We gather data from the best available sources, including vendor and retailer listings as well as other relevant and independent reviews sites. And we pore over customer reviews to find out what matters to real people who already own and use the products and services we’re assessing.

When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions. This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay. Neither ZDNET nor the author are compensated for these independent reviews. Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.

ZDNET’s editorial team writes on behalf of you, our reader. Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services. Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards. If we have made an error or published misleading information, we will correct or clarify the article. If you see inaccuracies in our content, please report the mistake via this form.

Home Tech Security

Want a Flipper Zero without paying inflated prices? Now’s your chance

The Flipper Zero is a powerful, multi-functional, cybersecurity tool, and you can now pick one up for less than usual.

Written by Adrian Kingsley-Hughes, Contributing Writer on

I’ve written quite a bit about the Flipper Zero, the portable, multi-functional, cybersecurity tool that looks like a kid’s toy, since I got my hands on one back in January. You can even load a variety of custom firmware onto the device to give it more powers.

The problem is, up until now supplies have been limited, and many would-be buyers have not been able to find one, or ended up buying one from a third-party seller at inflated prices.

Also: These are my 3 must-have Raspberry Pi accessories

Well, now’s your chance to get one — the official Flipper Zero shop has a good supply of Flipper Zeros, along with the Wi-Fi dev boards, silicone cases, screen protectors, and prototyping boards.

ZDNET RECOMMENDS

Flipper Zero

The compact, multi-functional, cybersecurity tool is back in stock, and not inflated in price this time around.

View at Flipper Zero store

Tech specs

ARM Cortex-M4 32-bit 64 MHz (application processor)
ARM Cortex-M0+ 32 MHz (network processor)
Flash: 1,024KB
SRAM: 256KB
1.4-inch 128 x 64 LCD monochrome display
5-button joystick with back button
2000mAh rechargeable battery
13.56 MHz NFC
125 kHz RFID
18 GPIO connector
Infrared (TX/RX range: 800-950 nm, TX power: 300 mW)
iButton 1-Wire support (Dallas DS1990A/CYFRAL compatible)
USB 2.0 port, type C

Flipper zero reading the NFC chip in a bank card (details redacted)

Adrian Kingsley-Hughes/ZDNET

Don’t be fooled by the looks.

Underneath the fun exterior and the cute dolphin virtual pet graphics is a powerful dual-core ARM processor that runs hardware that can be used to hack the planet.

Also: Flipper Zero: Geeky toy or serious security tool?

There’s a sub-GHz wireless antenna that can capture and transmit wireless codes to operate wireless devices and access control systems, such as garage door remotes, boom barriers, IoT sensors, and even remote keyless systems, along with a built-in infrared transceiver that can both capture and transmit IR codes to control things like TVs.

But there’s more.

The Flipper Zero can read, store, and emulate NFC tags, EM-4100, and HID Prox RFID cards.

There’s also a 1-wire connector that can read and emulate iButton (aka DS1990A, CYFRAL, Touch Memory, or Dallas key) contact keys.

Also: Protect your data with a USB condom

Finally, on the top, there are GPIO connectors that allow the Flipper Zero to connect to other gadgets in the real world.

Everything is controlled using the 5-way touchpad and a back button, and the 1.4-inch 128×64 display is ample to keep you informed.

Flipper Zero with Wi-Fi dev board fitted

Adrian Kingsley-Hughes/ZDNET

Keeping everything running is a 2,000mAh rechargeable battery that’s good enough for a week or so before needing a recharge.

You will need to add your own microSD card to make the Flipper Zero work. I recommend something cheap and cheerful like this Amazon Basics microSD card because it isn’t going to get stressed by heavy workloads.

For $169, the Flipper Zero is very interesting. Sure, it’s not a substitute for high-end pentesting tools, but it offers a lot of power in a very small and portable package. It’s certainly not a toy, and it’s one of the easiest, cheapest ways to work with RFIC and NFC. It’s also a fantastic educational tool and a way to get people — young and old — into cybersecurity.

About The Author

admin