5 very useful tools and gadgets for better 3D printing

5 very useful tools and gadgets for better 3D printing

Home & Office
Why you can trust ZDNET : ZDNET independently tests and researches products to bring you our best recommendations and advice. When you buy through our links, we may earn a commission. Our process

‘ZDNET Recommends’: What exactly does it mean?

ZDNET’s recommendations are based on many hours of testing, research, and comparison shopping. We gather data from the best available sources, including vendor and retailer listings as well as other relevant and independent reviews sites. And we pore over customer reviews to find out what matters to real people who already own and use the products and services we’re assessing.

When you click through from our site to a retailer and buy a product or service, we may earn affiliate commissions. This helps support our work, but does not affect what we cover or how, and it does not affect the price you pay. Neither ZDNET nor the author are compensated for these independent reviews. Indeed, we follow strict guidelines that ensure our editorial content is never influenced by advertisers.

ZDNET’s editorial team writes on behalf of you, our reader. Our goal is to deliver the most accurate information and the most knowledgeable advice possible in order to help you make smarter buying decisions on tech gear and a wide array of products and services. Our editors thoroughly review and fact-check every article to ensure that our content meets the highest standards. If we have made an error or published misleading information, we will correct or clarify the article. If you see inaccuracies in our content, please report the mistake via this form.

Close

5 very useful tools and gadgets for better 3D printing

I’ve collected a small selection of tools close to my printer. Here are the ones I wind up using all the time.

OK, I’m getting into 3D printing a lot more than I thought I would.

There’s something amazing about seeing a 3D model of an object on a screen being transformed into physical reality. And the speed and accuracy of the AnkerMake M5 I’m using allows me to make more prints, faster, outputting some of the most accurate prints I’ve seen right out of the box.

Also: How to get into 3D printing without breaking (too many) things

But I’ve noticed that I’ve slowly collected a small selection of tools close to my printer. (OK, they’re within the enclosure my printer lives in)

Here are the tools I wind up using all the time.

Micro cutters used to remove the supports on a 3D print
Adrian Kingsley-Hughes/ZDNET

I use these micro wire cutters for a variety of things, from cutting the end of filament before feeding it into the 3D printer to nibbling at the supports on prints.

Using micro cutters is far safer than hacking at a print with a knife, and they allow for greater precision.

I recommend picking up a five-pack of cheap micro cutters because they’re super useful for all sorts of cutting, and by buying the cheaper cutters, you can throw them away when they’re blunt.

Bent-nose pliers are another useful tool for removing print supports
Adrian Kingsley-Hughes/ZDNET

Bent-nose pliers are super handy for removing the supports that are sometimes needed when printing a complicated object with overhangs. These supports can be in awkward places that are not easy to access with your fingers or snips.

Bent-nose pliers are the perfect tool to access these hard-to-reach supports.

3D printers generate a lot of annoying plastic bits that need dealing with
Adrian Kingsley-Hughes/ZDNET

3D printing creates a lot of plastic bits that, if left unchecked, tend to get everywhere.

Also: The best cheap 3D printers under $300

To stay ahead of the mess, I use my cordless stick vacuum cleaner — with a fitted crevice tool — which is a great all-around vacuum cleaner. If you want something more specific to keep in your workshop, a smaller, USB-charging handheld vacuum cleaner might be a better choice.

Digital calipers come in handy when precision printing is what you're doing
Adrian Kingsley-Hughes/ZDNET

As you start to print more complicated objects, or parts that need to fit together or accommodate something that already exists in the real world, accuracy becomes increasingly important.

Also: This $8 tool has dramatically improved my 3D printing results

Here’s a tool that I’ve found super useful: digital calipers. You can use them for all your measuring needs. You won’t need super-expensive $100+ calipers. (Although if you are working in a high-precision industry, then a set of Mitutoyo digital calipers offers greater peace of mind.) For most of us, the accuracy of cheaper calipers is more than enough. 

To test the accuracy of your printer you can output calibration prints and use the digital calipers to measure them for accuracy.

Mini diamond needle files
Adrian Kingsley-Hughes/ZDNET

These tiny files are perfect for smoothing out and finishing 3D prints. I find them particularly useful for cleaning up threads and knurling on prints as they can get into tight spaces.

Editorial standards

Add a Comment